← Back to all articles
Networking5 min read

How much does office network installation cost? What drives the price and how to plan the Wi-Fi

An office network quote is more than a router and some cable. Here is what shapes the total, how to size the Wi-Fi, and what to keep when the budget is tight.

The cost of an office network installation depends mostly on cabling, the number of access points, and how much of the work is done properly the first time. The router is the smallest decision. Owners often ask for a price per room or per employee, but two offices with the same headcount can need very different amounts of cable and Wi-Fi coverage, so a fair quote starts with the building and not the staff list.

Cabling is usually the largest part of the labor. Every wall socket, access point, and CCTV or printer location needs its own cable run back to a central rack. Running cable through a ceiling in a single open floor is quick. Running it across floors, through concrete, or in a finished office with no ceiling space takes more time and sometimes needs conduit. Copper Ethernet runs are generally limited to 100 meters including patch cables, according to Netgear and Axis guidance, so a large site may need a second switch location.

Wi-Fi coverage is the part owners most often under-plan. Counting employees is not enough, because each person carries a laptop and a phone and sometimes more. The vendor 7signal recommends a maximum of 30 clients per access point in most enterprise environments, and notes that heavy applications and older devices reduce that number. Walls and meeting rooms matter as well. One strong access point in the corridor rarely serves a closed room at the far end.

Switches and power also shape the price. Modern access points and cameras are commonly powered through the network cable, which needs a PoE switch with enough power budget for every device plugged into it. Netgear notes that PoE standards work on Cat 5e or Cat 6 cable, and recommends those categories for better performance. A switch that is too small for the load is a common reason an office network works on day one and drops devices a month later.

There are sensible ways to lower the cost. Use a few well placed access points instead of many cheap ones, keep the rack close to the center of the floor to shorten runs, and install cable for future sockets while the ceiling is already open. Choose standard business equipment that is easy to buy again. If the budget is limited, phase the work: cabling first, because it is hard to redo, and add access points or extra switches later.

Some items should not be cut. Keep proper cable and terminations, a business grade router or firewall with a changed admin password, a separate guest Wi-Fi so visitors do not sit on the same network as your accounting computers, and a labeled patch panel. Labels cost almost nothing and save hours the first time something fails. Also keep a written record of the network layout, the admin logins, and who holds them.

Compare quotes by asking each vendor for the same breakdown: number and model of access points, switch ports and PoE budget, cable type and estimated length, rack and patch panel, configuration work, and warranty terms. Ask how the vendor will test Wi-Fi coverage after installation, for example by walking the floor with a laptop. When quotes are listed line by line, the difference between them stops being a mystery.

A network is also something you maintain. Firmware updates, a backup of the router configuration, and a quick check when staff complain about slow connections keep small problems from becoming outages. Decide before installation who is responsible for that, whether it is an internal person or an outside IT partner.

If you have a floor plan or a quotation and are unsure whether the Wi-Fi and cabling scope is enough, send it to us. We can review it with you in an online consultation, and an advisory session starts from IDR 1 million. The cabling and mounting themselves need a technician at your office, so that part is not done online.

Frequently asked questions

What makes up the cost of an office network installation?
An office network installation cost combines cabling, a router or firewall, switches, access points, racks and patch panels, labor, and configuration. Cabling and the number of access points usually move the total more than the router does, so the building layout matters.
How many Wi-Fi access points does an office need?
An office needs enough access points to cover the floor and to carry the number of devices in use. Vendor 7signal suggests at most 30 clients per access point in most enterprise settings, and walls, meeting rooms, and heavy applications lower that figure.
Can a company save money by using a home router for the office?
A home router can work for a very small team with light use. It becomes a risk when staff, printers, CCTV, and video calls share one weak signal, because the network slows down and there is little control over who connects.
Does Kerja Itu Mudah install office networks remotely?
No. Cabling and access point mounting need a technician on site. Kerja Itu Mudah offers online consulting for clients across Indonesia, which can include reviewing a network plan or quotation before you sign, but the physical installation happens at your location.